HomeNQ DefenseBomb/RF Jamming SystemND-BS003 Reactive Stationary Jammer

ND-BS003 Reactive Stationary Jammer

ND-BS003

The ND-BS003 is designed for blocking remote controlled improvised explosive devices (RCIEDs) used by terrorist.

Having considered the variety of jamming targets and the wide range of uncertainties, the more advanced and effective jamming signal modulation method is adopted, which significantly increases the jamming efficiency in each band, for the purpose of providing security protection and ensuring the safety of VIPs.

By adopting the unique Smart Power® technology, the wideband frequency coverage range of the system can be from 20 to 2700MHz (up to 6GHz based on requirements) and its total response time is less than 200μs. Besides, automatic self-protection mechanism effectively supports stable operation and long service life by preventing the system from overheating and over-current.

Specification

RF frequency band 20~2700MHz (9 Bands)
Output power Total PF power: 180W
Jamming signal bandwidth Minimum: 30kHz(Barrage mode)/1MHz (Reactive mode)
Jamming signal type Broadband white noise/CW/FM/AM
Detect signal sensitive Minimum: -90dBm
Signal source DDS (Direct Digital Synthesizer)
Reactive response time 20-200μs
Spectral power density 30W/MHz(depending on working band)
Jamming range 10~100meter (*Max 1km )( depending on transmitter frequency and scenario)
Power supply 220VAC
Power consumption 500W
Remote control Wire control panel or remote monitoring software (optional)
Dimensions 390x 390 x250mm
Weight Approx. 20kg

Type

Bomb/RF Jamming System

Features

• Wideband frequency coverage range from 20 to 2700MH

• High sensitive threat signal detect low to -90dBm

• High efficiency power amplifier technology

• Total response time is less than 200μs

• High spectral power density up to 30W/MHz for extended jamming radius
(depending on maximum output power module choose, it can be up to 100W/MHz)

• Unique Smart Power® technology for advanced reactive jamming and power saving

• Support in barrage jamming mode if needed

• Slow start up design of circuit to make the device work stably

• Easy operations using a wired connection to the control panel for system monitoring

• Automatic System Self Protection to prevent from overheating and over current protection

• High input Voltage and low Voltage protection, VSWR protection

Complete Set

• Jammer module  x 1 (or several)
• Antenna  x 1 (or several)
• Battery  x 1
• Power Supply  x 1
• Remote Control(optional)  x 1
• User Manual  x 1