- Home
- Products
- Solutions
- Newsroom
- Support
- About Us
- Contact Us
- Reseller
- Scope
- EN
ND-BU004 Base Security Anti-Drone System is designed against consumer-grade small rotor drones, merging long-range detection, jamming and record tracking functions into one system. By virtue of advanced space-time adaptive processing technology, the system could provide continuous and accurate surveillance and monitoring within low altitude areas, with 360° coverage in azimuth and high coverage in elevation, to protect key areas and response to threats from invading drones.
The system mainly consists of Detecting Unit, Jamming Unit and Camera Unit. Detecting Unit is for detecting and tracking long-distance drones and leads Jamming Unit to interfere with the remote control circuits and navigation signals of drones and force them to land or return. The Camera Unit can efficiently record the tracks of the detected drone for further analysis and assist the Detecting Unit for more accurate and effective monitoring.
Main Features of Detecting Unit
• Adopt advanced space-time adaptive processing technology to achieve all-around protection and high accuracy detection
• Adopt intelligent algorithm with proactive learning capability, has strong ability to distinguish targets independently and adapt to operating environment, could be interconnected with various comprehensive control platforms for collaborative deployment
• Support simultaneous detection of more than 200 targets, able to report accurate detection results in a fairly short time
• Support GPS map importing, protection area setting, real-time monitoring, recording and playback for further analysis
• Support all day (7x24h) protection, adapt to various bad weather such as rain, snow, fog, haze, sand and dust, able to eliminate false alarms or alarm failure to the greatest extent
• Easy to operate, with high waterproof and dustproof grade, shock and drop resistant
Main Features of Jamming Unit
• Full-band jamming, software definable
• Digital jamming source design
• All-in-one design
• High power broadband amplifier design
• Easy installation and wide application
• Detecting Unit
• Jamming Unit
• Camera Unit
• Control Software
• Power Supply
• User Manual
Detecting Unit | |
Frequency band | X band |
Detection distance | ≥5km (RCS=0.01m2) |
Blind zone | 200m |
Angle coverage | Azimuth: 360°; Pitch: 0° ~ 30° (configurable in 90° range) |
Multi-target tracking capability | TWS≥200 batches; TAS≥4 batches |
Weight (each radar) | ≤15kg (bracket excluded) |
Dimensions (each radar) | ≤315 x 315 x 133mm (connector height excluded) |
Protection grade | IP66 |
Jamming Unit | |
Jamming frequency range | Jamming channel output can be set freely within the frequency range of 300MHz – 6000MHz |
Typical jamming bands | 410-440MHz, 830-870MHz, 875-915MHz, 920-960MHz, 1160-1200MHz, 1220-1260MHz, 1440-1480MHz, GPS L1, 2.40-2.50GHz, 5.70-5.90GHz |
Jamming distance | 5km (0.1W transmitting power of target drone) |
Transmitting power | ≥100W/each jamming module jamming emission power software adjustable |
Weight | ≤28kg |
Power supply | AC220V±10%, 50Hz |
Operating temperature | -40°C ~ +60°C |
Protection grade | IP66 |
Camera Unit | ||
Visible camera | Tracking range | 2km (Drone size: 0.3 x 0.3m) |
Focal length | 6.5-312mm | |
Image sensor | 1/2.8″ 2.13MP CMOS | |
Resolution | 1080P (1920 x 1080) | |
Thermal camera | Tracking range | 1km (Drone size: 0.3 x 0.3m) |
Focal length | 75mm | |
Resolution | 640 x 512 | |
Spectrum range | 8-14μm | |
Sensitivity (NETD) | ≤40mK | |
Pan-tilt | Rotation range | Horizontal: 360° continuous infinite position rotation; Vertical: -90°~+90° |
Maximum speed | Horizontal: 60°/s; Vertical: 60°/s | |
Additional system | Dimension | ≤350 x 250 x 190mm |
Weight | 7.5kg | |
Operation temperature and humidity | Temperature: -40℃~+60℃; Humidity: <90%RH | |
Protection grade | IP66 |
• Detecting Unit | x 1 |
• Jamming Unit | x 1 |
• Camera Unit | x 1 |
• Control Software | x 1 |
• Power Supply | x 1 |
• User Manual | x 1 |